Yato tool trolley equipped high quality 185 pm workshop car toolbox

Product description

Service cabinet with Yato tools. It has6 drawers with block, The guided tours are mounted on ball -bearing tours - the upper 3 floors have a load capacity of 25 kg and the lower 3 floors - 35 kg. The closet is with onepractical handle andLong -lived rubber wheels equipped, so that it can be moved without any problems.

The worktop isWith non -slip material Excess, which makes working on the closet easier.Strong, double walls andCorners that are equipped with bumpers, Make the closet durable, resistant and resistant to damage.

Characteristic:

pleasant handleStrong, double wallscentral locking system two keysnon -slip worktop6 spacious drawers with stop, load capacity: 25 kg - 3 above, 35 kg - 3 below185 piecesRubber wheels, one of them with brakesWide spheres of universal perforationCorner protection officer

Schubladen content:

Drawer 1:

Ring mouth key 6-21 mm, 16 pieces (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 mm)Ring mouth key 22-32 mm, 6 pieces (22, 24, 27, 28, 30, 32 mm)Angle ring key6-19 mm, 7- part (6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19 mm)

Drawer 2:

Zonge, 4 pieces  (180 mm, 160 mm, 160 mm long nose, 160 mm bent nose)Flat screwdriver, 7 pieces (3x75, 5x100, 5x150, 6x38, 6x100, 6x150, 8x150 mm)Cross -slot screwdriver , 7 pieces (PH0X100, PH1X75, PH1X100, PH2X38, PH2X100, PH2X150, PH3X150 mm)

Drawer 3:

Split key set, 24 pieces (- 1/2 ”(12.7 mm): 10, 11.12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 32 mm; - 1/2 "(12.7 mm): 127 mm; - 1/2" (12.7 mm); - 1/2 "(12.7 mm): 255 mm 72t; - 1/2" (12.7 mm): 255 mm; - 1/2 ”(12.7 mm): 16; 21 mm)Screwdriver bits (bits), 40 pieces (H4, H5, H6, H7, H10, H10, H12 (L = 30mm); H4, H5, H6, H7, H8, H10, H12 (L = 75mm); M5, M6, M10, M12 (L = 30 mm); M5, M6, M8, M10, M12 (L = 75 mm); T20, T25, T30, T40, T50, T50, T55 (L = 30 mm); T20, T25, T30, T45, T45 , T50, T55 (L = 75 mm); 1/2 "(12.7 mm), 3/8" (9.5 mm))1/2 "Long pins 8-21 mm, 14 pieces (1/2 "(12.7 mm): 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18.19, 20, 21 mm)

Drawer 4:

Hämmer and chisel, 5 pieces (Hämmer: 300 g (L = 300 mm), FI40 mm (L = 350 mm); chisel: 10x8x142 mm, 12x10x152 mm, 16x13x170 mm)Hex, Torx, Pins, 25 pieces ( 1/2 ”(12.5mm): E10, E12, E14, E16, E18, E20; 1/4 ”(6.3mm): E4, E5, E6, E7, E8, Hex: 2, 2.5, 3, 4, 5, 6, 7, 8, 10, 12 mm; Torx: T10, T15, T20, T25, T27, T30, T40)Split key set, 30 parts (1/4 ”(6.3 mm): 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm; 1/4” (6.3.) Mm): 8, 10, 11, 12, 13 mm; 1/4 "(6.3 mm): 50.8, 101.6 mm, 1/4" (6.3 mm); 1/4 "(6.3 mm): 155 mm; 1/4" (6.3 mm): 152.4 mm; 1/4 "(6.3 mm): 150 mm) Number of parameter of the drawers:6Maximum load [kg]:35Size (cm]:97 x 77 x 47