YATO
YATO YT-72305 micrometer 0.001-25mm ironing screw fine measuring screw digital
Availability for pickups could not be loaded
Beschreibung
Measurement area: 0 - 25 mm
Resolution: 0.001 mm / 0.00005 inches
Accuracy: ± 0.002 mm / ± 0.0001 inches
Measurement: 5 - 10 N
Display: LCD liquid crystal display
Electricity: ≤ 35 μa
Power supply: a silver battery 1.55 V, type SR44
Operating temperature: 5 ° C - 40 ° C / 41 ° F - 104
° F storage temperature: -20 ° C ÷ 60 ° C / -4 ° F ÷ 140 ° C
Influence of humidity: irrelevant under 80% relative air humidity control / application for precise measurements and easy reading of 0 to 25 mm. Using method work preparation:
- Clean the measuring surfaces and guidance. Use a cotton cloth. Do not use solvents or acids.
- Check the zero position, touch the measuring surfaces by only turning the friction clutch with the button. Then keep the on / off ••• Set ”button” approx. Press for 2 seconds until the display is reset to zero.
- Check whether all buttons, switches and ads work properly.
Basic measurement methods:
1. absolutely measurement
- Loosen the clamp.
-Ut switch on the device by pressing the "On" button. Select the measuring unit by pressing the "ABS / Inc ••• Unit" button for about 2 seconds. Every time the measurement result is displayed alternately in customs or millimeters. The result in customs is described by the "In" symbol, which is displayed on the screen.
Press the "ABS / Inc ••• Unit" button until the "ABS" symbol is displayed on the display.
- Spread the measuring surfaces a little further than the measuring object.
- then roughly set by turning with the spindle button and continue tightening by turning the friction clutch button. Stop pulling when the clutch snaps in.
- Read the measurement result from the display.
2. Relative measurement
The measuring principle corresponds to the above, but the relative measurement is used to compare two dimensions.
- If you press the "ABS / Inc ••• Unit" button, the display is reset and "Inc" is displayed on the display. After again measuring, you can read the difference in the dimensions.
The micrometer is equipped with a steel ball in a rubber bearing that enables the assembly on the measuring surface of the micrometer. It facilitates the measurement of elements with a small area. After installation, the display should be reset in accordance with the procedure described above.
Note! It is recommended to assemble the workpiece or the micrometer before starting the measurement. In this way you can achieve the highest measurement accuracy. It is also recommended to carry out several measurements to obtain the arithmetic means of the results.
YATO YT-72305 Mikrometer
To our products
frequently asked Questions
Does this part fit my vehicle?
If the part relates to a vehicle, please let us check the part free of charge using our parts form.
Please note: Even if your vehicle is included in the vehicle list, this does not necessarily mean that the part will also fit your vehicle. We can only guarantee a perfect fit if you send us the vehicle data for checking before you buy it.
If you give us your vehicle data, we can use this data to find the right parts for you. However, we can only guarantee that the parts will fit as long as original parts are installed in your vehicle or you provide us with the correct vehicle data. Subject to errors and program errors.
{formbuilder:NzMwOTU=}
Is shipping free?
In Germany, there are generally no shipping costs for our customers. For all other countries, the exact shipping costs are displayed in the checkout.
You can find all information about our shipping here.
Does this vehicle part have an E-mark?
All vehicle parts we offer, such as silencers, catalytic converters or diesel particle filters, are manufactured in accordance with ISO 9001:2000 and EN-ISO 9001. If mufflers, catalytic converters or diesel particulate filters do not have an E-mark, they are not permitted on the road or a special permit must be obtained from the buyer. These permits trigger costs that are to be borne by the buyer of the product. The silencers, catalytic converters or diesel particulate filters offered in this advertisement have an E-mark if this is explicitly mentioned in the text or title of the offer. With mufflers, catalytic converters or diesel particle filters with the E-mark, there are no restrictions on public road traffic. If you are unsure, please do not hesitate to contact us.
Our contact information:
| Monday to Friday | 09:00 - 16:00 (Europe/Berlin) |
|
Phone |
+49 3563 512333 |