Elring 471501 Dirko ht elastic universal sealing mass seal 200 silicone

200ml professional-press can, sealing compound black. Property: permanently elasticchem. Property: non -solventchem. Property: UV-resistantFinding type: pressure packContent [ml]: 200Material: siliconeTemperature range of [° C]: -60Temperature range up to [° C]: 315Color: Black Application: Car: dividing joints, cylinder head, crankcase, oil pan, control housing, thermostat, water pump, gear, axles, differential, water box on the cooler, body (not overwhelming) Motorcycle: crankcase cylinder foot Further applicable at: Motors, mechanics, aggregates, as well as for hobby and do -it -yourself Dirko PROFI Press HT high -performance, permanent elastic seal of seals based on silicone Application:Carefully remove the seal of seals with plastic spatula.Clean the sealing surfaces and degrease.Remove the lock cap before use. Doused pressThe nozzle steps out of the opening and canto be applied to the component contour. Caterpillar not tooApply thick because there is a risk that the sealing materialdrip into the interior. After completing thePut the protective cap on the nozzle.Processing temperature: +5 ° C to +30 ° C.Sichtroupe approx. 3.5 - 4.0 mm.Hardening time: approx. 4 mm in 24 hours Warnings according to CLP Regulation (EC) No. 1272/2008 Signal word: danger Pictogram: Hazard information H229 container is under pressure: can burst when heated. safety instructions P210 from heat / spark / open flame / hot surfaces. Do not smoke. P251 container is under pressure: Do not pierce or burn, not even after use. Protect P410 + P412 from sunlight and do not expose temperatures of more than 50 ° C. Additional information on the label EUH208: Contains 3-aminopropyltriethoxysilane. Can cause allergic reactions.