Mannol 9803 leather repair set leather preparation processing repair kit

Product description

Leather repair set - a practical and User -friendly kit for restoring surfaces from natural and artificial leather and vinyl. It can be used to repair Car cushions and cladding as well as in everyday life to repair of Furniture, leather clothing, shoes, bags and suitcases, short drivers and sitting from boats, motorcycles and other motor vehicles, roofs From Cabriolets etc.

Characteristics:
- repairs all holes, cracks, cuts, burns on leather and Vinyl surfaces and dents on the latter;
- The kit contains heat -resistant repair masses in seven colors, so that they Receive all colors when mixing. The surface to be treated Corresponding color can be selected based on the attached table.
- The kit contains a set of three leaves of heat -resistant paper with the most common textures made of leather and vinyl.
- The desired result is achieved at no significant cost.

Application:
1. Prepare the damaged area and clean it.
Clean the damaged area with one Household vacuum cleaner. Before the start of work, make sure the Area is dry. Cut the worn areas and Excess threads and the charred edges carefully with scissors or a knife. Remove everything charred when burning Material. Give the location of the damage smooth edges - you should Get a hole in the material with smooth edges.

2. Place the fabric carrier under the damaged area. Push The back of the fabric in step 1 with a spatula under the hole. To have big holes To repair with a size of more than 6 mm, cut the fabric carrier To a size that is slightly larger than the resulting hole. Use You a spatula to smooth the back of the fabric. Glue that Run back on the inside with vinyl adhesive. With a hair dryer dry.

3. Choose a heat -resistant paper with the texture that best Texture of the damaged surface fits. Draw on the back of the selected sheet heat -resistant paper the outline of the damaged Area. In this way you can use the heat transfer point for the Correctly position tools in point 8.

4. Repair deep damage. Use for deep damage, e.g. B. On a vinyl fittings board, a transparent vinyl glue with filler and a spatula to the damaged area on the original To align the surface level. The glue shrinks slightly when drying and leaves a cavity that later with a colored repair mass is filled.

5. Use the table to select the color or identify Empirically a number of repair compositions that mix the Create the necessary color. Mix this set in the required amount in the mixing container to the desired color too receive. Check whether the color matches by one Rub the small amount of the mixture into the undamaged surface and this Then remove with a cloth.

6. Apply the repair mix. As soon as the vinyl glue dry is, wear the mixture evenly and gently with a spatula damaged area. Wipe excess material or damage away. Do not cover the damage area.

7. Place heat -resistant paper with the texture on the one to be repaired Area. Glue it onto the repair mixture and make sure that that the marked contour is directly above the damaged area located. Don't move it. If the repair on a vertical Surface takes place, fasten the paper with tape at the top.

8. Heat treatment. This is a very important phase in Repair process. Turn on the iron and leave it Heat to a high temperature for at least four minutes. Place them The tip of the heat transfer tool directly onto the iron and leave They warm it from the iron for a few minutes. Then press that Tool on heat -resistant paper against the work contour and delete them the area to be repaired with a little effort for 20 to 30 seconds in circular movements. Remove the heat -resistant paper from the repaired area.

The kit contains:
Heat -resistant repair mass in seven colors (black, blue, green, red, Brown, white and yellow) - 7 PCs.
Vinyl glue - 1 PC.
Bridges of fabric - 1 PC.
Set heat -resistant paper with three different textures - 3 PCs.
Table to select a color - 1 PC.
Spatel - 1 PC.
Mixed capacity - 1 PC.
Heat transfer tool - 1 PC.