Mannol front slices windshields stone chill repair set processing

Product description

Windshield repair set - a professional Set to restore windshields. In contrast to others Similar products are not required by ultraviolet radiation. That The principle of the kit is to remove air from chips and cracks and to fill them with a strong resin, causing the treated area of ​​the Glass becomes even stronger than before. To achieve the best results you should carry out repairs as soon as possible after the damage. Before the broken or cracked area is contaminated.

Characteristics:
- minimizes the risk of cracks after a pothole or a chip on the Windshield has hardened and prevents them from continuing to spread.
- High -quality repair resin with extremely low viscosity fills itself the smallest cracks reliably;
- enables the windshield to restore within 30-50 Minutes.

Application:
1. Clean the damaged windshield with a cleaning cloth of Dust and dirt. The glass surface is recommended for the best results to degrease the chip with the 9691 Mannol Brake Cleaner.

2. Remove glass fragments with a special red button from the damaged area.

3. Install the adhesive disc so that the damaged area in the middle is located.

4. Place a black O-ring around the edges of the hole in the Adhesive disc. Black O-rings can be used several times.

5. Glue the red mushroom -shaped base on the adhesive slice and add each According to degree of damage, 2-6 drops of repair resin from a pipe. The more Rays the crack and the longer they are, the more resin is needed all to fill these cracks.

6. Place the syringe down to the mushroom -shaped with the piston Base. Then pull the piston as far as possible and create A vacuum under the piston. Wait 10 minutes. Remove the Injection. Push the piston back in and put the syringe on the base. Then pull out the piston as far as possible and Wait for another 10 minutes.

7. Remove the syringe, the mushroom -shaped floor, the black ring and The adhesive disc. If necessary, clean the glass with a scraper of the adhesive disc. To insert the repair resin into the remaining Damaged areas and cracks. Cover the damaged area the repair resin applied with a thermoplate became. Smooth the thermoplastics with a scraper and one Cleaning cloth so that you lie firmly on the glass and no air bubbles underneath are. Remove excess resin with a cleaning cloth from the Edges of the thermoplastics. Wait 15 minutes.

8. Remove the thermoplate or scratch it with a scraper away. Carefully scratch the dried repair resin from the glass.

The kit contains:
- Repair resin - 1 PC.
- adhesive disc - 3 PCs.
- Red mushroom -shaped base - 1 PC.
- Thermoplasts - 5 PCs.
- Schaber with blade - 1 PC.
- Spray with feather clamp - 1 PC.
- Cleaning cloth - 1 PC.
- Red button - 1 PC.
- Black O -ring - 2 PCs.