Yato yt-82458 2in1 soldering iron hot air rag station 75W outdoor piston discharge station

Product description

2-in-1-hot station with the symbol YT-82458 with a double LED digital display, temperature control and numerous functions that enable a proper solder connection. The station supports a 908D pollen, which is adapted to the very popular interchangeable tips of the 900m series, and a hot air handle with a blow, which is powered by a brushless fan.

Loeo:

Performance: 75W temperature range: 200 - 480 ° C. Temperature accuracy: + - 1 ° C. Ruhe status of the device: 10 min hot air station: performance: 750W temperature range: 100 - 480 ° C. Temperature accuracy: + - 2 ° C. air flow: max 120 l / Regulation of the airflower brushless fan ensures quiet operating automatic cooling and resting state of the device after inserting the hot air handle into the holder on the side of the station thirty Round Hot air nozzles with diameters: 4.4 mm, 8 mm, 10 mm -quadratical hot air nozzle with one side: 12 mmall connoisseurs Functions: Temperature stabilization detection of sensor failure on the front-line safety system in the sitting dose of Digital dual display with blue LED backlight informs us about: Set and then the real temperature of the tip / air from the hot air die station changes to the resting dodging heating tips / hot air modus a fixed metal stand: operating clamping G of the heating: 24Vspitze type: 900m ceramic heating cable length: 1 mate weight: approx. 100 chopping air handle with brushless fan with a bladder drive: nozzle holder diameter: 21mm ceramic heating cable length: 1 mangele weight: approx. 200 g

The 2-in-1 hot blost station with the YT-82458 symbol is produced in ESD-proof technology, which guarantees that no excessive electrostatic charging on the housing will accumulate. As a result, we limit the risk of damage, for example, sensitive SMD circuits. The soldering station heats up to an operating temperature of 350 ° C in approx. 15 seconds, the marriage jet in about 10 seconds.

The temperature stabilization function makes it possible to maintain the set temperature of the tip under different conditions of the heat requirement for a proper soldering connection. Depending on the size of the soldered element and the soldering field, the tip releases more or less warmth, and the device continuously reads its actual value with the help of the built -in top temperature sensor and compares it with the sentence as needed, the power consumption is increased or reduced in order to reduce the inserted To maintain temperature.

Due to the restriction function of the device, the soldering station can switch to standby mode, which automatically reduces the operating temperature to 200 ° C. This avoids unnecessary heating the tip, which significantly extends your lifespan. The model YT-82458, more precisely the soldering station module, changes to rest mode after 10 minutes of the operator's inactivity.

The automatic cooling function in combination with the idle state function enables the hot air module to cool the nozzle to 100 ° C and then switch to rest mode. After completing the work, the operator should put the handle into a plastic handle with an integrated sensor activation element. Then the nozzle cools down and automatically holds the idle state. By lifting the handle from the handle, the hot air module is automatically activated to the parameters previously set

The sensor error recognition function enables the automatic diagnosis of electronic circuits that are required for the proper operation of the device. After switching on the mains switch, the station goes through a self -diagnosis and indicates an error message in the event of problems.